A
- A. Aboud, Manal Optical Method to Determine the Orientation of Monocrystalline Silicon Wafers [Volume 25, Issue 8, 2007, Page 950-954]
- A. Al-Mishhadani, Shakir Properties of Glascrete Tiles [Volume 25, Issue 8, 2007, Page 1012-1022]
- A. Al-sharify, Aseel The Biological Effects of Low Level Laser Therapy with Static Magnetic Field on Acute and Chronic Pain [Volume 25, Issue 10, 2007, Page 1154-1161]
- Abd, Khalid Karam Product Design and Conceptual Process Planning Integration By Using Machining Features [Volume 25, Issue 3, 2007, Page 422-430]
- Abd, Khalid Karam Early Manufacturing Cost Estimate For Mechanical Parts [Volume 25, Issue 1, 2007, Page 103-116]
- Abdullah, Auroba. Nafaa. Characteristics of Bubbles and Gas Holdup In A Two-Phase Column For Different Liquid Phases [Volume 25, Issue 2, 2007, Page 282-290]
- Abdul-Razzak, Ayad Amjad Artificial Neural NetworkModel for Predicting Nonlinear Response of Uniformly Loaded Fixed Plates [Volume 25, Issue 3, 2007, Page 334-348]
- Abdul–Razzak, A. A. Effects of Mix Property On Time Dependent Behavior of Reinforced Concrete Slabs [Volume 25, Issue 2, 2007, Page 266-281]
- AbdulWahab, Mutaz. S. 3D Wavelet-Based Optical Flow Estimation [Volume 25, Issue 2, 2007, Page 299-311]
- Afnan, K. Yousif Measurement of Thermooptic Coefficient in Lead Sulfide Using Laser Single-Beam Scanning Technique [Volume 25, Issue 5, 2007, Page 683-689]
- Ahmad, Ali Moosa Improving Oxidation Resistance of Stainless Steel (AISI 316L) by Pack Cementation [Volume 25, Issue 7, 2007, Page 918-939]
- Ahmad, Kamal Mohammad Effect Of Solid Catalyst On Bubble Rise Velocity And Gas- Drift Flux In Three-Phase-Columns [Volume 25, Issue 1, 2007, Page 97-102]
- Ahmed, A. M. Light-Induced Etching of Silicon [Volume 25, Issue 3, 2007, Page 467-474]
- Ahmed, Abdul-Jabar Muttair The Effect of Size and Location of a Heating Source on the Buoyant Flow in a Heated Space [Volume 25, Issue 4, 2007, Page 543-557]
- Ahmed, Lamia A. Improvement of Marshall Properties of the Asphalt Concrete Mixtures Using the Polyethylene as Additive [Volume 25, Issue 3, 2007, Page 383-394]
- Ahmed, N. Ibrahiem Study on Improvement of Casting Conditions for Some Aluminum Bronze Alloys [Volume 25, Issue 6, 2007, Page 711-727]
- Ahmed, Saria D. Fabrication and Characterization of Cu2S /Si Heterojunction Photodetector Based on Spray Pyrolysis of Cu2S on Si [Volume 25, Issue 2, 2007, Page 176-182]
- Ahmed, Waleed Khalil Parametric Study On The Effect Of The Fiber Reinforced Polymer(FRP) Pad On The Stress Intensity Factor of A Cracked Pipe [Volume 25, Issue 1, 2007, Page 9-24]
- Ajee, Sami Abualnoun Influence of Heat Treatment Conditions on Microstructure of Ti-6Al-7Nb Alloy As Used Surgical Implant Materials [Volume 25, Issue 3, 2007, Page 431-442]
- Akeel, D. Subhi Phase Transformations of Hadfield Manganese Steels [Volume 25, Issue 6, 2007, Page 808-814]
- AL-Abideen, Eman H.Z. Treatment of Oily Wastewater [Volume 25, Issue 3, 2007, Page 407-421]
- Al-Bayati, Nabil A-M. J. Nonlinear Finite Element Analysis of Reinforced Concrete Beams with Large Opening under Flexure [Volume 25, Issue 2, 2007, Page 210-228]
- Al-Faiz, M. Z. Study the Integro-Differential Equation in a Lorentzian Energy Spread Case [Volume 25, Issue 2, 2007, Page 291-298]
- Al-heety, Mustafa K. Behaviour of Composite Slim Floor Beam with Partial Interaction [Volume 25, Issue 3, 2007, Page 495-511]
- Ali, A. Al–Ameer Comparative Study Between Newtonian And Non Newtonian Lubricants In Journal Bearing Using Variable Viscosity [Volume 25, Issue 6, 2007, Page 775-796]
- Ali, Ammar A. Grillage Analysis of Plates for Vibration and Stability [Volume 25, Issue 1, 2007, Page 117-131]
- Ali, H. Ataiwi Effect of Zn% and Thermomechanical Treatments on the Mechanical Properties of Al-Zn-Mg Alloys [Volume 25, Issue 7, 2007, Page 849-862]
- Ali, Hanaa M. Mohammed Numerical Study of Flow InMechanically Ventilated Rooms Under Non- Isothermal Conditions [Volume 25, Issue 4, 2007, Page 534-542]
- Aljabbar, Bassam A. Effect of Super Plasticizer on the Properties of Pre-cast Concrete Flags Reinforced by Steel Fibers and Including Slag [Volume 25, Issue 10, 2007, Page 337-352]
- Al Jurmaa, M. A. Effects of Mix Property On Time Dependent Behavior of Reinforced Concrete Slabs [Volume 25, Issue 2, 2007, Page 266-281]
- Al-Karkhy, Omar F. Lutfy Feedforward Controller for Nonlinear Systems Utilizing a Genetically Trained Fuzzy Neural Network [Volume 25, Issue 3, 2007, Page 475-494]
- Al-Kizwin, Muhanned i J. Evaluation of Sediment Transport In Kirkuk Irrigation Channel [Volume 25, Issue 3, 2007, Page 349-357]
- Allawi, Abbas Abdel-Majid Assessing The Dead Loads Effect on the Dynamic Behavior of Plates by Using Finite Elements Method [Volume 25, Issue 3, 2007, Page 328-333]
- Allawi, Abbas Abdel-Majid Stiffness Matrix for Haunched Members With Including Effect of Transverse Shear Deformations [Volume 25, Issue 2, 2007, Page 242-252]
- Al-Rifai, Wail e N. Parametric Study On The Effect Of The Fiber Reinforced Polymer(FRP) Pad On The Stress Intensity Factor of A Cracked Pipe [Volume 25, Issue 1, 2007, Page 9-24]
- Al-Saady, Mukhallad A. Z. Load-Slip Relationship in Modified Push-Out Test (Experimental Work) [Volume 25, Issue 3, 2007, Page 358-369]
- Alsalhy, Qusay Fadhel Effect of Ethanol Concentrations in Internal Coagulant on the Morphology and Separation Performance of Polyethersulfone (PES) Hollow Fiber UFMembranes Prepared by PES/Ethanol/NMP Solution [Volume 25, Issue 2, 2007, Page 253-265]
- Al-Sarraf, Sabih Z. Grillage Analysis of Plates for Vibration and Stability [Volume 25, Issue 1, 2007, Page 117-131]
- Al-Shaarbaf, Ihsan A. S. Nonlinear Finite Element Analysis of Reinforced Concrete Beams with Large Opening under Flexure [Volume 25, Issue 2, 2007, Page 210-228]
- Al-Ubaidy, Ali M. K. Prediction of Delay at a Parking Garage Facility Using STARSIM Simulation Package [Volume 25, Issue 2, 2007, Page 195-209]
- Alwan, Alwan. M. Light-Induced Etching of Silicon [Volume 25, Issue 3, 2007, Page 467-474]
- Alzubaydi, Thair L. Influence of Heat Treatment Conditions on Microstructure of Ti-6Al-7Nb Alloy As Used Surgical Implant Materials [Volume 25, Issue 3, 2007, Page 431-442]
- Ammar, H. Jraiz Study on Temperature and Etching Effects on Silicon Oxide Formation Using Laser Ellipsometric Method [Volume 25, Issue 6, 2007, Page 797-807]
- AmmarM, . Al-Baldawi Study on Temperature and Etching Effects on Silicon Oxide Formation Using Laser Ellipsometric Method [Volume 25, Issue 6, 2007, Page 797-807]
- A. Mohammed, Yousra Implementing Fuzzy Logic Controller Using VHDL [Volume 25, Issue 9, 2007, Page 1049-1055]
- Ayad, K. Hassan Numerical Simulation Of Two Dimensional Transient Natural Convection Heat Transfer From Isothermal Horizontal Cylindrical Annuli [Volume 25, Issue 6, 2007, Page 728-745]
- Aziz, Omer Q. Behavior of High Strength Concrete L-Beams Under Combined Bending and Shear [Volume 25, Issue 2, 2007, Page 312-327]
B
- Bader, Ban A.M. Measurement of Thermooptic Coefficient in Lead Sulfide Using Laser Single-Beam Scanning Technique [Volume 25, Issue 5, 2007, Page 683-689]
- B. Hamawand, Ihsan Production of Organosilane by The Direct Reaction of Silicon with Methyl Chloride [Volume 25, Issue 10, 2007, Page 1128-1142]
D
- D. Al-Alagawi, Saria Optical Method to Determine the Orientation of Monocrystalline Silicon Wafers [Volume 25, Issue 8, 2007, Page 950-954]
- D. Al-Sabti, Matheel Preparation of Macroporous Styrene – Divinyl Benzene Copolymers [Volume 25, Issue 9, 2007, Page 1041-1048]
- Daood, Yasmeen Z. Fabrication and Characterization of Cu2S /Si Heterojunction Photodetector Based on Spray Pyrolysis of Cu2S on Si [Volume 25, Issue 2, 2007, Page 176-182]
- Daoud, H. M. Study the Integro-Differential Equation in a Lorentzian Energy Spread Case [Volume 25, Issue 2, 2007, Page 291-298]
F
- F. Al-Rubaie, Mays Properties of Glascrete Tiles [Volume 25, Issue 8, 2007, Page 1012-1022]
- Farag Antwan, Nazar Reduced the Cooling Load and Improved Insulation Effect on Iraqi Buildings Using the Geothermal Energy Storage Phenomenon [Volume 25, Issue 9, 2007, Page 1064-1080]
- Faraj, Sufyan T. Secure E-Mail System Using S/Mime and Ib-Pkc [Volume 25, Issue 4, 2007, Page 646-668]
- Fattah, Mohammed Yousif The Boundary Element Method Versus The Finite Element Method For Solving Two-Dimensional Continuum Problems [Volume 25, Issue 2, 2007, Page 132-152]
- F. Jacob, Wisam Preparation of Macroporous Styrene – Divinyl Benzene Copolymers [Volume 25, Issue 9, 2007, Page 1041-1048]
- Frieh, Qais J. Effect of Super Plasticizer on the Properties of Pre-cast Concrete Flags Reinforced by Steel Fibers and Including Slag [Volume 25, Issue 10, 2007, Page 337-352]
- F. Shubair, Khalid A Secure Invisible Watermarking Using Rijndael Algorithm and Wavelet Transform [Volume 25, Issue 9, 2007, Page 1028-1040]
G
- G. jalhoom, Moayed Production of Organosilane by The Direct Reaction of Silicon with Methyl Chloride [Volume 25, Issue 10, 2007, Page 1128-1142]
H
- H, Ahmad A. Dopping Effect On Optical Constants of Polymethylmethacrylate (PMMA) [Volume 25, Issue 4, 2007, Page 558-568]
- Hala, M. AL-Zahawyi Synthesis Of Nucleosides Analogues Substituted With Oxy Amino Acetylenic Derivatives [Volume 25, Issue 6, 2007, Page 702-710]
- H. Al-Hussaini, Imad A Secure Invisible Watermarking Using Rijndael Algorithm and Wavelet Transform [Volume 25, Issue 9, 2007, Page 1028-1040]
- Hamadi, Oday A. Measurement of Thermooptic Coefficient in Lead Sulfide Using Laser Single-Beam Scanning Technique [Volume 25, Issue 5, 2007, Page 683-689]
- Hamadi, Oday A. Normalized Characteristics of Laser-Induced Diffusion of Arsenic Dopants in Silicon [Volume 25, Issue 4, 2007, Page 584-590]
- Hamawand, Ihsan B. Modelling Pressure Drop to Calculate Conversion of Silicon and Methyl Chloride in a Fluidized bed Reactor [Volume 25, Issue 4, 2007, Page 608-618]
- Hamdan, Wissam K. NC Roughing Maching of Cavities Defined by Surface of Revolution Approach [Volume 25, Issue 1, 2007, Page 56-77]
- Hamid, M. N. The Effect of Initial Temperature on Burning Velocity of Hydrogen – Air Mixtures [Volume 25, Issue 2, 2007, Page 183-194]
- Hanna, Fadi Z. The Effect of Surfactants on Characteristics of Hydrodynamic and Mass Transfer Coefficient in Gas-Liquid Dispersion Column [Volume 25, Issue 4, 2007, Page 591-607]
- Hassen, Sh. Majdi Mathematical Model of Autoclave Curing of Epoxy Resin Based Composite Materials [Volume 25, Issue 7, 2007, Page 828-835]
- Hliyil Hafiz, Mohammed Galvanic Corrosion Behavior of Electroless Nickel Coating in Al-Zubare Harbor-Water [Volume 25, Issue 9, 2007, Page 1056-1063]
- Hliyil Hafiz, Mohammed Surface Preparation of Aluminum for Plating by Zincating [Volume 25, Issue 10, 2007, Page 1184-1193]
- H. Miry, M. Channel Equalization Using Wavelet Denoising [Volume 25, Issue 9, 2007, Page 1081-1091]
- Husain Al Taie, Arkan K. Design and Analysis of A 3-D Conical Diffuser [Volume 25, Issue 3, 2007, Page 443-453]
- Hussain, Salma M. Normalized Characteristics of Laser-Induced Diffusion of Arsenic Dopants in Silicon [Volume 25, Issue 4, 2007, Page 584-590]
- Hussein Alywy, Ahmed Data Reduction In Real Time Database Using Critical And Pivot Points [Volume 25, Issue 9, 2007, Page 1092-1101]
I
- Ibrahem, Ali Muhsin Comparative Study Between Newtonian And Non Newtonian Lubricants In Journal Bearing Using Variable Viscosity [Volume 25, Issue 6, 2007, Page 775-796]
- Ibrahem, Mohammed T. Secure E-Mail System Using S/Mime and Ib-Pkc [Volume 25, Issue 4, 2007, Page 646-668]
- Ismail, Emad A. Prediction of Delay at a Parking Garage Facility Using STARSIM Simulation Package [Volume 25, Issue 2, 2007, Page 195-209]
J
- Jalil, Jalal M. Experimental and Numerical Studies on Water Cooling Tower Performance [Volume 25, Issue 4, 2007, Page 512-533]
- Jalil, Jalal M. Numerical Study of Flow InMechanically Ventilated Rooms Under Non- Isothermal Conditions [Volume 25, Issue 4, 2007, Page 534-542]
- Jasim, M. A. Al-lateef Numerical Simulation Of Two Dimensional Transient Natural Convection Heat Transfer From Isothermal Horizontal Cylindrical Annuli [Volume 25, Issue 6, 2007, Page 728-745]
- Jassim, Raghad Aladdin Image Denoising Using Hybrid Transforms [Volume 25, Issue 5, 2007, Page 669-682]
- Jawad, Waleed Khalid Investigatiion off Contact Interface Betweenane the Punnch and Blank in Deep Drawwing Prrocess [Volume 25, Issue 3, 2007, Page 370-382]
- Jawad Kadhim, Atheer A Mathematical Development of Gordon, Mills and Welch Generator Using Galois Field and Trace Polynomials [Volume 25, Issue 8, 2007, Page 961-971]
- J.H, Laith Numerical Investigation intoVelocity and Temperature Fields Over Smooth and Rough Ducts for Several Types of Turbulators [Volume 25, Issue 10, 2007, Page 1110-1127]
K
- K. Abdullah, Hassan Reduced the Cooling Load and Improved Insulation Effect on Iraqi Buildings Using the Geothermal Energy Storage Phenomenon [Volume 25, Issue 9, 2007, Page 1064-1080]
- Kadhim, Karim Muhsin Cumulative Damage in Fatigue of a Structure Subjected to Random Loading [Volume 25, Issue 7, 2007, Page 897-917]
- Karim, Ferhad R. Behavior of High Strength Concrete L-Beams Under Combined Bending and Shear [Volume 25, Issue 2, 2007, Page 312-327]
- Karim Muhsin, Kadhim Spectral Analysis for Randomly Excited Articulated vehicles [Volume 25, Issue 8, 2007, Page 972-987]
- Khalel Ibrahim, Talib Rapid Solidification Processing Of Al-3Wt%Mg Alloy [Volume 25, Issue 10, 2007, Page 1102-1109]
- Khalid, Z. Yahiya Study on Temperature and Etching Effects on Silicon Oxide Formation Using Laser Ellipsometric Method [Volume 25, Issue 6, 2007, Page 797-807]
- Khamis, R. A. Study the Integro-Differential Equation in a Lorentzian Energy Spread Case [Volume 25, Issue 2, 2007, Page 291-298]
- Khashan, Khawla S. Features of Spot-Matrix Surface Hardening of Low-Carbon Steel Using Pulsed Laser [Volume 25, Issue 2, 2007, Page 168-175]
- K. Hashim, Leena Implementing Fuzzy Logic Controller Using VHDL [Volume 25, Issue 9, 2007, Page 1049-1055]
- Khassaf, Saleh Issa Evaluation of Sediment Transport In Kirkuk Irrigation Channel [Volume 25, Issue 3, 2007, Page 349-357]
- K. Jawad, Jawad Preparation of Macroporous Styrene – Divinyl Benzene Copolymers [Volume 25, Issue 9, 2007, Page 1041-1048]
- Krikor, K. S. On-Line Current-Based Condition Monitoring and Fault Diagnosis of Three-Phase Induction Motor [Volume 25, Issue 3, 2007, Page 395-406]
- K. S. Al-hachamee, Eyad K. S. K. S. Al-hachamee Behaviour of Composite Slim Floor Beam with Partial Interaction [Volume 25, Issue 3, 2007, Page 495-511]
M
- M, Awatif A. Dopping Effect On Optical Constants of Polymethylmethacrylate (PMMA) [Volume 25, Issue 4, 2007, Page 558-568]
- M, Hashim Treatment of Oily Wastewater [Volume 25, Issue 3, 2007, Page 407-421]
- Mahmoud, Walid Amin Image Denoising Using Hybrid Transforms [Volume 25, Issue 5, 2007, Page 669-682]
- M. Al-Qaraawy, Saleh A Secure Invisible Watermarking Using Rijndael Algorithm and Wavelet Transform [Volume 25, Issue 9, 2007, Page 1028-1040]
- M. Alwan, Alwan Organic Vapors Sensor Based on Dangling Bonds of Porous Silicon [Volume 25, Issue 8, 2007, Page 1023-1027]
- M. Alwan, Alwan A Study On the Structure and Electrical Properties of Pbo.9Sn0.1Se/Si Heterojunction [Volume 25, Issue 10, 2007, Page 1149-1153]
- M.Alwan, Alwan Calculation of Energy Band gap of Porous Silicon Based On The Carrier Transport Mechanisms [Volume 25, Issue 10, 2007, Page 1143-1148]
- M. M. Kamali, Asslan Reduced the Cooling Load and Improved Insulation Effect on Iraqi Buildings Using the Geothermal Energy Storage Phenomenon [Volume 25, Issue 9, 2007, Page 1064-1080]
- Mohammad, Waheed Sh. Experimental and Numerical Studies on Water Cooling Tower Performance [Volume 25, Issue 4, 2007, Page 512-533]
- Mohammed, A. Abbas Improvement of Thermal Properties for Binary Systems PVFPh, PVF-B by Addition of Silicon Carbide [Volume 25, Issue 7, 2007, Page 836-848]
- Mohammed, Akeel A. Mixed Convection in The Entry Region of a Vertical Annulus with a Constant Temperature Rotating Inner Cylinder [Volume 25, Issue 1, 2007, Page 78-96]
- Mohammed, A.R. Yass Effect of Airplane Tail Aspect Ratio on Lateral- Directional Stability [Volume 25, Issue 6, 2007, Page 746-756]
- Mohammed, Laith A. Surface matrix based Machining Planes Determination for Milling Process (Roughing Stage) [Volume 25, Issue 2, 2007, Page 153-167]
- Mohammed, Thamer J. The Effect of Surfactants on Characteristics of Hydrodynamic and Mass Transfer Coefficient in Gas-Liquid Dispersion Column [Volume 25, Issue 4, 2007, Page 591-607]
- Mohammed, Thamer J. Treatment of Oily Wastewater [Volume 25, Issue 3, 2007, Page 407-421]
- Mohammed, Waheed S. The Effect of Size and Location of a Heating Source on the Buoyant Flow in a Heated Space [Volume 25, Issue 4, 2007, Page 543-557]
- Mokdad, T. Younis Studying Critical Flash Over of Different Types of High Voltage Insulator [Volume 25, Issue 6, 2007, Page 815-827]
- M. Salman, Hanaa A Content-Based Authentication Using Digital Speech Data [Volume 25, Issue 10, 2007, Page 1162-1170]
- Mukhlef Jasim, Ammar Electrical and Photovoltaic Properties of Sb-pSi Contact [Volume 25, Issue 8, 2007, Page 955-960]
- Muna, Khedeir Abbas Improving Oxidation Resistance of Stainless Steel (AISI 316L) by Pack Cementation [Volume 25, Issue 7, 2007, Page 918-939]
- Murtadha, Talib K. Numerical Study of Flow InMechanically Ventilated Rooms Under Non- Isothermal Conditions [Volume 25, Issue 4, 2007, Page 534-542]
- Mushate, Khudheyer S. Study of 2-D Laminar Flow In A pipe With A sudden Contraction of Cross Sectional Area [Volume 25, Issue 1, 2007, Page 1-8]
N
- N, Zeid Abdul-Majied Dopping Effect On Optical Constants of Polymethylmethacrylate (PMMA) [Volume 25, Issue 4, 2007, Page 558-568]
- Najat, J. Salah Mathematical Model of Autoclave Curing of Epoxy Resin Based Composite Materials [Volume 25, Issue 7, 2007, Page 828-835]
- N . Al-Mashhadany, Akram The Effect of Annealing Temperatures on Optical and Electrical Properties of PbTe Thin Films [Volume 25, Issue 10, 2007, Page 1171-1183]
- Nayef, Uday Muhsin Study of Electrical Properties of p-PbSe/p-Si Heterojunction [Volume 25, Issue 5, 2007, Page 690-695]
- Nayef, Uday Muhsin Photonic Devices Based on Porous Silicon Layers [Volume 25, Issue 5, 2007, Page 696-701]
- Nazar, Farag Antwan Effect of Window Over-Hang in Iraqi Building on Cooling Load [Volume 25, Issue 7, 2007, Page 940-949]
- Neran, K. Ibrahim Computer Aided Design and Modeling of FCCU Processing Iraqi Feed Stock [Volume 25, Issue 7, 2007, Page 863-878]
- Numan, Ali H. On-Line Current-Based Condition Monitoring and Fault Diagnosis of Three-Phase Induction Motor [Volume 25, Issue 3, 2007, Page 395-406]
O
- Omar, A. Abdulrazaq Phase Transformations of Hadfield Manganese Steels [Volume 25, Issue 6, 2007, Page 808-814]
R
- Rajab, Mohammed Improving Oxidation Resistance of Stainless Steel (AISI 316L) by Pack Cementation [Volume 25, Issue 7, 2007, Page 918-939]
- Rana, O. Mahdi Gain Characteristics of Silicon Transistor Treated by Laser [Volume 25, Issue 7, 2007, Page 890-896]
S
- Sabea Humod, Ali Rapid Solidification Processing Of Al-3Wt%Mg Alloy [Volume 25, Issue 10, 2007, Page 1102-1109]
- Safa, A. Al-Naimi Mathematical Modeling Of Multi Component Batch Extractive Distillation [Volume 25, Issue 6, 2007, Page 757-774]
- Said, Arkan F. The Effect of Initial Temperature on Burning Velocity of Hydrogen – Air Mixtures [Volume 25, Issue 2, 2007, Page 183-194]
- Saleh, Najat J. Thermal Initiation of Methylmethacrylate by Methoxy–oxobis [N-(4-bromophenyl) Salicylideneiminato] Vanadium (V) [Volume 25, Issue 1, 2007, Page 26-36]
- S. Al-Hasani, Emad Study of Tensile Strength and Hardness Property for Epoxy Reinforced With Glass Fiber Layers [Volume 25, Issue 8, 2007, Page 988-997]
- Salih, Raghad Kadhim Laplace Transformation for Determining The Linear Equivalence of The Periodic Sequence [Volume 25, Issue 2, 2007, Page 229-241]
- Saloomy, Gazy F. The Effect of Size and Location of a Heating Source on the Buoyant Flow in a Heated Space [Volume 25, Issue 4, 2007, Page 543-557]
- Sami, A. Ajeel Study on Improvement of Casting Conditions for Some Aluminum Bronze Alloys [Volume 25, Issue 6, 2007, Page 711-727]
- Sami, A. Ajeel Studying Critical Flash Over of Different Types of High Voltage Insulator [Volume 25, Issue 6, 2007, Page 815-827]
- Sami Mahdi, Baha Surface Preparation of Aluminum for Plating by Zincating [Volume 25, Issue 10, 2007, Page 1184-1193]
- Sanduk, M. I. Study the Integro-Differential Equation in a Lorentzian Energy Spread Case [Volume 25, Issue 2, 2007, Page 291-298]
- Shahab, Suha Kareem A Finite Element Analysis of Orthogonal Machining Using Different Tool Edge Geometries [Volume 25, Issue 4, 2007, Page 569-583]
- Shayma, H. Khazaal Computer Aided Design and Modeling of FCCU Processing Iraqi Feed Stock [Volume 25, Issue 7, 2007, Page 863-878]
- S. Mohammed, Waheed Numerical Investigation intoVelocity and Temperature Fields Over Smooth and Rough Ducts for Several Types of Turbulators [Volume 25, Issue 10, 2007, Page 1110-1127]
- S. Sadeq, Noor The Effect of Annealing Temperatures on Optical and Electrical Properties of PbTe Thin Films [Volume 25, Issue 10, 2007, Page 1171-1183]
- Swadi, Abdulsalam K. Influence of Heat Treatment Conditions on Microstructure of Ti-6Al-7Nb Alloy As Used Surgical Implant Materials [Volume 25, Issue 3, 2007, Page 431-442]
T
- Tarik Ahmed, Sabah Numerical Investigation intoVelocity and Temperature Fields Over Smooth and Rough Ducts for Several Types of Turbulators [Volume 25, Issue 10, 2007, Page 1110-1127]
- Tarrad, Ali Hussain A Numerical Model For Thermal-Hydraulic Design of a Shell And Single Pass Low Finned Tube Bundle Heat Exchanger [Volume 25, Issue 4, 2007, Page 619-645]
- Tawfiq, Maan Aabid A Finite Element Analysis of Orthogonal Machining Using Different Tool Edge Geometries [Volume 25, Issue 4, 2007, Page 569-583]
- Tawfiq, Maan Aabid Finite Element Analysis of the Rake Angle Effects on Residual Stresses in a Machined Layer [Volume 25, Issue 1, 2007, Page 36-48]
U
- Uleiwi, Jawad Kadhim Experimental Study of Flexural Strength of Laminate Composite Material [Volume 25, Issue 3, 2007, Page 454-466]
Y
- Yahiya, Khaled Z. Fabrication and Characterization of Cu2S /Si Heterojunction Photodetector Based on Spray Pyrolysis of Cu2S on Si [Volume 25, Issue 2, 2007, Page 176-182]
- Yahya, Khalid Z. Electrical and Photovoltaic Properties of In-pSi Contact [Volume 25, Issue 1, 2007, Page 49-55]
- Younis, K. Khoshnaw The Effect of Cutting Tool Vibration on Surface Roughness of Workpiece in Dry Turning Operation [Volume 25, Issue 7, 2007, Page 879-889]
Z
- Zaidoon, M. Shakoor Mathematical Modeling Of Multi Component Batch Extractive Distillation [Volume 25, Issue 6, 2007, Page 757-774]
- Zedan Khalifa, Muhannad Critical Speed of Hyperbolic Disks and Eccentricity Effects on The Stability of The Rotor Bearing System [Volume 25, Issue 8, 2007, Page 998-1011]
- Z. Hanna, Fadi Production of Organosilane by The Direct Reaction of Silicon with Methyl Chloride [Volume 25, Issue 10, 2007, Page 1128-1142]